Finding velocity of roller-bit and rotary-percussive drilling using the energy conservation law

Authors: Tyupin V.N.

Velocity of roller-bit and rotary–percussive drilling depends on many factors distributed in 4 groups in technical literature: rock properties, bit parameters, bit–rock interaction conditions and drilling modes. Literature sources present some very complex formulas which need finding empirical coefficients before determining drilling velocity, i.e. the formulas are difficult to use. Moreover, the formulas neglect jointing of rock masses. At the same time, mathematical relations connecting drilling velocity, drilling mode and drillability of jointed rocks will make it possible to rate drilling processes and adjust blasting parameters. These studies aim to determine velocity of roller-bit and rotary-percussive drilling using the energy conservation law. The used method of mathematical modeling allowed obtaining formulas for rock drilling velocity with regard to drilling modes, bit parameters, factor of rock hardness (strength) and rock mass jointing. The validity of the relations of the roller-bit and rotary-percussive drilling velocity is proved. The reliability of the drilling velocity formulas can be determined by means of investigations performed in open pit mines, with recording of all parameters and with mathematical processing of the data. The mathematical relations connecting drilling velocity, drilling modes, drill bit parameters and drillability of jointed rocks will enable rating of drilling and adjustment of blasting patterns.

Keywords: roller-bit drilling, rotary-percussive drilling, drilling velocity, energy conservation law, jointed rock mass, drilling modes, drillability.
For citation:

Tyupin V. N. Finding velocity of roller-bit and rotary-percussive drilling using the energy conservation law. MIAB. Mining Inf. Anal. Bull. 2020;(6):76-84. [In Russ]. DOI: 10.25018/0236-1493-2020-6-0-76-84.

Acknowledgements:
Issue number: 6
Year: 2020
Page number: 76-84
ISBN: 0236-1493
UDK: 622.23.01
DOI: 10.25018/0236-1493-2020-6-0-76-84
Article receipt date: 18.02.2020
Date of review receipt: 11.03.2020
Date of the editorial board′s decision on the article′s publishing: 20.05.2020
About authors:

V.N. Tyupin, Dr. Sci. (Eng.), Professor, e-mail: tyupinvn@mail.ru, Belgorod State National Research University, 308015, Belgorod, Russia.

For contacts:
Bibliography:

1. Kutuzov B. N. Vzryvnoe i mekhanicheskoe razrushenie gornykh porod [Explosive and mechanical destruction of rocks], Moscow, Nedra, 1973, 311 p.

2. Mosinec V. N., Pashkov A. D., Latyshev V.A. Razrushenie gornykh porod [The destruction of rocks], Moscow, Nedra, 1975, 216 p.

3. Tangaev I.A. Energoemkost' protsessov dobychi i pererabotki poleznykh iskopaemykh [Energy intensity of mining and mineral processing], Moscow, Nedra, 1986, 231 p.

4. Kryukov G. M. Fizika razrusheniya gornykh porod pri burenii i vzryvanii. T. 1 [Physics of rock destruction during drilling and blasting. Vol. 1], Moscow, Izd-vo «Gornaya kniga», 2006, 330 p.

5. Repin N.Ya., Bogatyrev V. P., Butkin V. D., Biryukov A. V. Burovzryvnye raboty na ugol'nykh razrezah [Drilling and blasting in coal mines], Moscow, Nedra, 1987, 254 p.

6. Sinev S. V. In situ drilling models. Territoriya Neftegaz. 2016, no 11, pp. 41—49.

7. Shigin A. O., Shigina A.A., Bovin K.A. Increasing the productivity of cone drilling machines with timely regulation of operating parameters. Vestnik Irkutskogo gosudarstvennogo tekhnicheskogo universiteta. 2015, no 8, pp. 65—72.

8. Kaledin O. S. Innovative technologies for the construction of ultra-deep mine shafts. Gornyi Zhurnal. 2014, no 4, pp. 77—81.

9. Sinev S. V. Mechanisms, methods and methods of rock destruction in cone drilling. Gornyy informatsionno-analiticheskiy byulleten’. 2016, no 1, pp. 149—159.

10. Mindeli E. O. Razrushenie gornykh porod [The destruction of rocks], Moscow, Nedra, 1975, 600 p.

11. Trubetskoy K. N., Potapov M. G., Vinitskiy K. E., Mel'nikov N. N. Spravochnik. Otkrytye gornye raboty [Reference. Open cast mining], Moscow, Gornoe byuro, 1994, 590 p.

12. Sinev S. V. Drillability of rocks and the choice of the most effective drilling tool. Gornyi Zhurnal. 2018, no 12, pp. 59—64. DOI: 10.17580/gzh.2018.12.12.

13. Capik M., Yilmaz A. O., Yasar S. Relationships between the drilling rate index and physicomechanical rock properties. Bulletin of Engineering Geology and the Environment. 2017. Vol. 76. No 1. Pp. 253—261.

14. Zhabin A., Polyakov A., Averin E. Scale factors for conversion of forces on disc cutters for the main domestic and foreign methods. Mining of Mineral Deposits. 2017. Vol. 11. No 3. Pp. 50—55.

15. Beshenkov P. S., Polushin N. I., Gkhorbani S., Sorokin E. N. Stress distribution analysis of PDC drill bits by computer modeling. Eurasian Mining. 2017. No 2. Pp. 25—28. DOI: 10.17580/ em.2017.02.06.

16. Rakishev B. R., Shashenko A. N., Kovrov A. S. Trends of therock failure conceptions development. News of the national academy of sciences of the republic of Kazakhstan. Series of geology and technical sciences. 2018. Vol. 5. No 431. Pp. 161—169. DOI: 10.32014/2018.2518-170X.46.

17. Eremenko V.A., Neguritsa D. L. Efficient and active monitoring of stresses and strains in rock masses. Eurasian Mining. 2016. No 1. Pp. 21—24. DOI: 10.17580/em.2016.01.02.

18. Krylov I. O., Valavin V. S. Effects of ultrasonic treatment of old tailings at the KamyshBurun Iron Ore Plant. Ecology and Industry of Russia. 2018. Vol. 22. No 2. Pp. 13—19.

19. Tyupin V. N. Vzryvnye igeomekhanicheskieprotsessyvtreshchinovatykhnapryazhennykh gornykh massivakh [Explosive and geomechanical processes in fractured stressed mountain ranges], Belgorod, ID «Belgorod» NIU «BelGU», 2017, 192 p.

20. Kutuzov B. N., Tyupin V. N. A simplified calculation of the parameters of a mass explosion in quarries. Izvestiya vysshikh uchebnykh zavedeniy. Gornyy zhurnal. 1985, no 7, pp. 66—67.

21. Kutuzov B. N. Razrushenie gornykh porod vzryvom [Rock destruction by explosion], Moscow, izd-vo MGI, 1992, 516 p. [In Russ].

Our partners

Подписка на рассылку

Раз в месяц Вы будете получать информацию о новом номере журнала, новых книгах издательства, а также о конференциях, форумах и других профессиональных мероприятиях.